Hello Everyone !!!
ReadBack backup is the most important . If your full rom is dead , you can use ReadBack Backup To Restore it.....
2) Download Scatter File from here.
3) Download SP flash tools (alternative download link of SP flash tools)
4) Download mtk droid tools (alternative download link of MTK droid tools)
Step 2) Click 'Add' and tap on added read back entry.
Step 3) Select any path to save file and click ok, write 0x3E180000 (For kitkat and lolipop OTA) and 0x82d00000 (For those who download lolipop from internet) in length and click ok.
Step 4) Click on read back and connect phone without battery. Wait till it completes.
Step 5) Once you see a green circle, close SP flash tools and switch on the phone.
Step 6) When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
Step 7) Go back and enter developers options(in settings), and check usb debugging on.
Step 8) Now run MTK Driod tools and it will detect phone.
Step 9) In MTK Droid tools, click 'root, backup and recovery' tab.
Step 10) Click 'To process file ROM_ from Flash Tool.
Step 11) Locate the file you got from read back.
Step 12) Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
Step 13) Now wait again.
Once done, you will get your SP flashable backup in MTK Driod Tools/backup.
Read back complete.
ReadBack backup is the most important . If your full rom is dead , you can use ReadBack Backup To Restore it.....
You Need :
1) Download and install drivers (Download)
If not working try these too (Download)
Problem in installation?? Go here
2) Download Scatter File from here.
3) Download SP flash tools (alternative download link of SP flash tools)
4) Download mtk droid tools (alternative download link of MTK droid tools)
Let's Start :
Step 1) Open SP flash tools, load scatter in SP flash tools and go to read back tab.Step 2) Click 'Add' and tap on added read back entry.
Step 3) Select any path to save file and click ok, write 0x3E180000 (For kitkat and lolipop OTA) and 0x82d00000 (For those who download lolipop from internet) in length and click ok.
Step 4) Click on read back and connect phone without battery. Wait till it completes.
Step 5) Once you see a green circle, close SP flash tools and switch on the phone.
Step 6) When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
Step 7) Go back and enter developers options(in settings), and check usb debugging on.
Step 8) Now run MTK Driod tools and it will detect phone.
Step 9) In MTK Droid tools, click 'root, backup and recovery' tab.
Step 10) Click 'To process file ROM_ from Flash Tool.
Step 11) Locate the file you got from read back.
Step 12) Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
Step 13) Now wait again.
Once done, you will get your SP flashable backup in MTK Driod Tools/backup.
Read back complete.
0 comments: